articletimestratnow

Despite their ground-ready, durable and insulated construction, submersible water pumps still present severe hazards for homeowners and shouldn't be found in ponds designed for swimming or human immersion. The thing is simple: electricity and water do not mix. Therefore, installing a power submersible water pump for water gardens, natural ponds, or pools requires great skill and experience to prevent electrocution.

Manufacturers design submersible pumps to be safe. As an example, they encase them in cast-iron housing built to isolate the electrical and working areas of the unit. All cables are shielded and sealed by standard rubber. However, both casing and the rubber shielding does not guarantee that the submersible water pump won't have any experience of water.

Water Seals
The rubber water seals on a submersible pump contain no adhesive. Instead, they form the seal due to a crimping method that tightens components within the pump. The seal insulates the inside of the pump from water, humidity, and outside air.

While this produces a higher level of insulation, occasional seal failures can occur. A little malfunction brings the inside of the pump into experience of the water garden or natural pond water. The result of this malfunction could be electrified water in the pond Visit website.

The Cables
Such as the primary elements of the pump, manufacturers visit great lengths to properly seal the cables. As an example, they'll fill gaps with epoxy to avoid water from invading the unit. They also wrap the cables in a neoprene, which can be both air and watertight.

Epoxy is incredibly effective at forming a waterproof seal. This seal won't fail unless it is put through some form of impact that will lead it to crack. If the seal cracks, water may get to the cable. Exactly the same does work for neoprene.

Regular Outlets vs. GFCI Receptacles
Both the National Electric Code (NEC) and OSHA require that homes now contain GFCI receptacles in areas where water exists or potentially exists. These areas include bathrooms, kitchens, utility rooms, garages, and anywhere outside. GFCI receptacles prevent electrocution by cutting off the ability source when a unique increase or “leakage” in power, like this caused when water comes into experience of electricity, is detected.

Unfortunately, many older homes do not have GFCI receptacles. Consequently, plugging a power water pump in to a regular outlet will make it at risk of a power surge. Additionally, it may increase the danger of electric shock. Therefore, if you utilize a power pump, you need to make sure that you plug it in to a GFCI receptacle or replace your old outlet.

Freezing Temperatures Through the Winter
During the winter, it is recommended to remove the water pump from your own water garden or natural pond. Winters in Illinois produce frigid temperatures that may plummet below zero. Consequently, the water in a natural pond or water garden may stay frozen through the season.

Frozen water will take its toll on a submersible water pump. Just one single freeze could cause the casing or the cabling to crack open, exposing the electrical parts. You may not notice the cracks due to the multilayers of the casing. Therefore, whenever you switch on the pump in the springtime, you might be at risk of electric shock.

Abrasives and Heavy Objects
Since easiest ponds or water gardens contain rocks, plants, sand, and other objects, it is very important to make sure that they do not come into experience of the water pump.

When placing your pump, be sure to isolate it from any heavy rocks, sharp objects, or metal objects. Also, if you utilize sand, position the pump so that it is filtering minimal amount of sand possible. Since sand is abrasive, it may damage the inner areas of the pump over time.

Never swim or wade in a lake with a Submersible Water Pump
You ought to never swim or wade in a lake or pool with a submersible water pump. Even though these pumps were created with many safety features, it is not worth the risk. There are special pumps created for swimming pools and ponds that do not carry this risk. If you want to enter your pond or pools with a submersible water pump to retrieve something or perform routine maintenance it is crucial that you switch off the electricity to the submersible pump and enter with caution. 

Need Assistance with Your Water Garden? Contact Us Today!
If you should be preparing to build your water garden project, then Reflections can help. We give you a wide selection of features and options to help you create an ideal serene water garden for your backyard.